Inspection Services

Your One Stop Shop

We provide the inspection services you need to get all the information you need. In addition to the services below, we also provide WDO and Sewer Scopes through a Licensed and insured third party contractor.

  • Buyer Inspections
  • Seller Inspections
  • 4-Point Inspections
  • Wind Mitigation Inspections
  • Mobile/manufactured Home Inspections
  • Well Water Testing (laboratory analysis)
  • Well Systems inspections
  • WDO Inspections (3rd party)
  • Sewer Scope

Home Inspections

Our Home Inspection Provides you peace of mind and some insight as to the condition of the home and what, if any, corrections or repairs may be needed. We want to insure that your home is in favorable operating condition before you move in, and you have some idea of what may be required in the future we strive to find defects and problems that may cause short and long term problems.

A typical inspection is 2-4 hours with the last hour or so being a question and answer session giving you a chance to address any concerns. You should expect a normal inspection to include the following (when Safely accessible):

•Roof, vents, flashings, and trim,

•Gutters and downspouts,

•Skylight, chimney and other roof penetrations,

•Decks, stoops, porches, and railings,

•Driveways and walkways

•Eaves, soffit and fascia,

•Grading and drainage
•Basement, foundation and crawlspace,

•Water penetration and foundation movement,

•Heating systems,

•Cooling systems,

•Main water shut off valves,

•Water heating system,

•Interior plumbing fixtures and faucets,

•Drainage sump pumps with accessible floats,

•Garage doors, safety sensors, and openers

•Electrical service line and meter box,

•Main disconnect and service amperage,

•Electrical panels, breakers and fuses,

•Grounding and bonding,

•GFCIs and AFCIs,

•Fireplace damper door and hearth,

•Insulation and ventilation,

•And much More

Manufactured/Mobile Home Inspections

A mobile/manufactured home inspection is similar to a general inspection, but it has some special areas of concern. Not only do factory-built homes have different materials and fabrication methods, they’re more vulnerable to damage. To make the process extra complicated, some systems are neither visible nor accessible. If you are looking to purchase a mobile home in the Northeast Florida area, and need to schedule an inspection, you have come to the right place.

Wind Mitigation Inspector

A windstorm inspection, also referred to as a windstorm mitigation inspection, windstorm insurance inspection or wind mitigation inspection, is a kind of home inspection common in the coastal areas of the Southeastern United States. The purpose of a windstorm inspection is to determine the appropriateness of a given structure’s construction in the event of strong winds, such as those present in a hurricane.
Wind mitigation inspections look for construction features that have been shown to reduce losses in hurricanes, such as a hip roof, concrete block construction, the presence of gable end bracing, shutters and opening protections, the presence of roof to wall attachments such as toe nails, clips or hurricane straps, and the presence of a secondary water resistance barrier.

4-Point Inspections

The 4-Point Inspection is often a required inspection in order to obtain (or maintain) insurance coverage. The standard 4-Point inspection covers only four key areas ( Roof, Electrical, Plumbing and Heating and A/C systems). We take the hassle out of this type of insurance inspection.

We do a thorough inspection, but the process is very simple for you. We are fully licensed, certified, and insured to meet your inspection needs. We will guide you through the process and answer any questions or concerns that you might have.

Roof Certifications

When performing the Roof Certification Inspection we ascertain the following information
•Roof Covering Material (asphalt shingle, tile etc.)
•Age of the Roof Covering
•Date the Roof was last updated
•If updated, was there a full or partial replacement
•Visible signs of damage/deterioration
•Signs of leaks

A roof certification inspection is not a guarantee or warranty. It is a unbiased, third party report on the overall health and condition of the roofing system.

Well Systems Inspections

Water tapped by a private well is often of the highest quality. When buying a home with a private well, your home inspection should include a well system check up to ensure the well is in good working order and the quality of the water produced meets health standards. Well system inspections in Florida should be considered essential.

Our Well Inspection Includes:
1) Pressure Tank Condition, tank Air/pressure and volume
2) Electrical Disconnect
3) Pressure Gauge
4) Main Shut-off Valves
5) Proper “Kick –on” Pressure setting
6) Proper “Kick –off” Pressure setting
7) Pump motor electrical draw
8) Pump performance – output volume gal/min
9) General water quality (Odor, cloudiness Etc.)
10) Well head – Check wiring and potential for well contamination What a well inspection does not include:

We DO NOT evaluate the home’s water table to ensure there will be long term supply, provide a warranty or give estimates on life spans of equipment or determine if the physical well location is safe from underground contaminants or other non-visible risks.

We DO NOT CHEMICALLY TEST the quality of the water unless requested which is highly recommended for well water AND homes built before 1986 regardless of the water source.

Close Menu
Content Protected